RISCO Group GT490X - Manual (Page 13)

Below is shown some of the Headers (menu numbers, see page 14) that are available
and the options that appear under each Header.
Please refer to the GT490X Engineer’s
Reference Guide for further details. The manual is available from the web site.
Available Headers & Options
Program Zones...
Zone Types
Zone Descriptors
Zone Wiring
Zone Attributes
(Test/Part/Chime/Cleaner/Walk)
Zone Double Knock, Arm, Log
Zone E/E Mode
Zone Event Tags
Program Setting Modes...
Setting for Full Set
Setting for Part 1 Set
Setting for Part 2 Set
Setting for Part 3 Set
Setting Delay
Setting Sounders
Setting Confirmation
Setting for Auto-Part Set
Program Entry Times...
Entry Time 1
Entry Time 2
Program Bells & Sounders...
Bell Type & NovActive On/Off
Bell Delay Number of Arms
Bell & Sounder Ring
Bell Tamper Mode
Bell in Part Set
Program Keypad...
Keypad Alert 1 Keys
Keypad Alert 2 Keys
Quick Key
Keypad Number of Keypads
Keypad Backlight Mode
Ace/Prox
Program Digicom...
Digicom Type or Test
Vo-Comm
Digicom Delay / Part
Digicom Channels
Digicom Functions
Digicom View Modem Log
Modem Functions
Comms Functions
Comms Off
Site ID
Tel No. 1
Tell No. 2
Line Monitor
Line Security
Restore Reports
Open / Close Channels
Advanced Functions
Modem Functions
Modem Comms Off/On
Modem Mode
Double Ring
Keypad Lock / In-Use Text
Site ID Code
Password
Tel No. 1
Tel No. 2
Modem Access
Send Keys / Status
Program Linefault Modes...
Linefault Sounders
Linefault In Exit Mode
Linefault Log Mode
Line Fault Detect Time
Page 12
PR5846 Rev12 490X QS Eng.qxd 10/05/2012 11:39 Page 13