Evolve Communications RD5000 - Manual (Page 30)

29 *Trademark
Browsing and Tuning
One of the most beneficial features of the GUIDE Remote * is being able to find a
show in the Program Listings and tune directly to it with a single keypress.
To tune to a show in the Program Listings, perform the following steps:
Using the Remote
1
2
Press the GUIDE key to enter
the Program Listings.
Press the Up / Down Arrow
key to move the highlight bar
to the channel you want to
watch.
Press the Left / Right Arrow
key to see what show is on in
the previous or next time slot.
Press the SELECT key to
tune to the highlighted show.
Note If you are in Suggestions or Reminders, continue pressing the GUIDE
key until you access the Program Listings.
Note If you highlight a show that is not currently airing and you press the SELECT
key, your TV will tune to the channel you highlighted even if the show is not
on TV at that time.
Note If you continue to hold the Left / Right Arrow key you will eventually see
an “End of TV Listings” popup. This indicates that you have reached the
beginning or end of Program Listings.
Using the GUIDE Key
Tip To scroll quickly through the Program Listings press and hold the
Up / Down or Left / Right Arrow
key . (see Quick Browse page 30)
Note Once you tune to a channel, a Channel Screen will appear with details about
the show you’re watching. (see page 25)
Note You may tune from within the Program Listings only if you have set up a
DirecTune* device.