Evolve Communications RD5000 - Manual (Page 21)

20 *Trademark
The device you use to change channels (typically your TV, cable box, or satellite
box) is referred to as your
DirecTune* device. DirecTune lets you jump directly to a
TV channel from within the TV Listings. Your remote needs to know what device is
responsible for changing channels, such as your TV, cable box, satellite box or
VCR. It also needs to know the procedure for changing channels (for instance,
whether or not you have to press an “enter” button after selecting a channel).
Please identify the DirecTune device in Setup DirecTune when the screen prompts
you. Only one device can be set up as the DirecTune device. Therefore, you
should set up all your devices prior to setting up a DirecTune device. You may
change the DirecTune device settings at anytime.
Getting Started
Setup DirecTune
6. Setup DirecTune*
Determining DirecTune* Device
Which device should you set up as your DirecTune device? To assist you in
determining which device should be set up as your DirecTune device, see below.
The TV is recommended as the DirecTune device in the following
configurations:
TV or TV + VCR or TV + Cable-without-a-box or
TV + VCR + Cable-without-a-box
Cable-without-a-box indicates that your cable line is connected to your TV or
VCR and you use your TV to tune channels.
The Cable box is recommended as the DirecTune device in the following
configurations:
Cable box + TV or Cable box + TV + VCR
The Satellite receiver is recommended as the DirecTune device in the
following configurations:
Satellite receiver + TV or Satellite receiver + TV + VCR
The VCR is recommended as the DirecTune device if you use your VCR to
tune channels.