Figure 3. connecting the over-the-air antenna – EchoStar Over-the-Air Module MT2 User Manual
Page 6
Page 5
4.
Connect the cable from your over-the-air antenna to the
O
VER
-
THE
-
A
IR
A
NTENNA
I
N
port on the module (see Figure 3). Only one cable
is needed because the module has an internal splitter to provide the
dual-OTA tuner capability.
Figure 3. Connecting the Over-the-Air Antenna
5.
Plug the receiver’s power cord into the electrical outlet. Turn the
receiver back on after it has reset itself.
TO
OVER-THE-AIR
ANTENNA
OTA Module.book Page 5 Thursday, July 3, 2008 4:35 PM