Removing the ota module, Ota m, Emoving – EchoStar Over-the-Air Module MT2 User Manual
Page 10: Odule
Page 9
R
EMOVING
THE
OTA M
ODULE
Do not remove the OTA Module unless necessary as you will no longer
be able to tune to your over-the-air channels if the module is removed.
1.
Unplug the receiver’s power cord from the electrical outlet.
2.
Disconnect any cables connected to the module’s
O
VER
THE
A
IR
A
NTENNA
I
N
port and/or
C
H
3-4 O
UT
port.
3.
Remove the screws connecting the module to the receiver’s back
panel. Gently remove the module.
4.
Replace the module port cover and attach it to your receiver using
the screws that had connected the module.
5.
Plug the receiver’s power cord into the electrical outlet, and turn it
back on.
6.
Store the OTA Module in the original box when it is not installed in
the receiver.
OTA Module.book Page 9 Thursday, July 3, 2008 4:35 PM