Set iso sensitivity, Set image quality, Set white balance – Epson R-D1s User Manual

Page 5: Set aperture

Text mode
Original mode

glish

Set ISO Sensitivity

Pull up and rotate the outer ring of the shutter speed dial to select the
ISO sensitivity: 200, 400, 800, or 1600.

Set Image Quality

Pull up and hold the image quality/WB lever at the Q position, and
rotate the jog dial to select the desired image quality setting on the
status gauge.

Select from the following:

R: RAW/RAW+JPEG (10/13 MB)

H: JPEG (High resolution: 3 MB)

N: JPEG (Normal resolution: 1.5 MB)

Set White Balance

Pull down and hold the image quality/WB lever at the WB position,
and rotate the jog dial to select the white balance setting on the status
gauge.

Select from the following:

Set Aperture

Rotate the lens aperture ring to the desired value.

Auto

Sunny
Shade
Cloudy

Incandescent

Fluorescent