Epson Expression 1680 - Manual (Page 36)

2-16 Setting Up the Scanner
R4C6740
Setup Guide
Rev. C
SETUP.FM A5 size
10/26/00
L Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
Checking your Windows 98 version
Follow the steps below to check your Windows 98 version.
1. Right-click the My Computer icon on your desktop, and
select Properties.
2. In the General menu, read the description under System.
If you see 4.10.1998, your version of Windows 98 is not the
Second Edition, and you must follow the steps in the next
section when changing the SCSI board or ID number.
If the description does not include 4.10.1998, you can change
the ID number or SCSI board without following the steps
below.
Changing the ID number or SCSI board
1. Connect the scanner to your computer.
Note:
If you have cameras or scanners other than the EPSON
Expression 1680 listed in the Control Panel's Scanner and Cameras
Properties dialog box, you must also connect them to your computer
or USB hub.
2. Turn on the scanner and any other devices listed in the
Scanner and Cameras Properties dialog box, then turn on
your computer.
3. Click the Start menu, point to Settings and click Control
Panel.
4. Double-click the Scanners and Cameras icon.
5. Select EPSON Expression1680 and click Remove.