Epson Expression 1680 - Manual (Page 31)

2
Setting Up the Scanner 2-11
R4C6740
Setup Guide
Rev. C
SETUP.FM A5 size
10/26/00
R Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
* Scanner will not work if selected.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned
to another device. Otherwise the computer, scanner, and other
devices will not operate properly.
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices
to communicate properly with each other. Depending on your
computer system, you may need to change the terminator switch
setting.
Note:
Do not use an external terminator.
7 Not available for Macintosh Always used for the
Macintosh itself
May not be available for
PCs. Usually used for the PC’s SCSI
board
✽ Not available For transportation purposes.*
See ”Transporting the
Scanner and the
Transparency Unit” in the
Maintenance and
Troubleshooting section of
the online Reference Guide.
ID Availability Description
The terminator switch is located
at the rear of the scanner.