Powerfix Z28970A-02 - Manual (Page 61)

61 GB/MT
– with end fittings and tensioning devices: deformations, cracks,
pronounced signs of wear, signs of corrosion. Only lashing
straps bearing identification labels shall be repaired. If there is
any accidental contact with chemical products, the lashing
strap must be removed from service and the manufacturer or
supplier consulted.
10. Care should be taken that the lashing strap is not damaged by
the sharp edges of the load on which it is used. Regular visual
inspection before and after each use is recommended.
11. Only legibly marked and labelled lashing straps may be used.
12. Lashing straps may not be used when knotted.
13. Damage to labels must be prevented by keeping them away
from sharp edges of the load and, if possible, from the load.
14. Webbing must be protected against friction, abrasion and
damage from loads with sharp edges by using protective sleeves
and / or corner protectors.
Q
Use
Lashing down:
With lashing straps stretched over it, the load is pressed down onto
106714-Z29870A-02_IT_PT_Content.indd 61 11/28/2014 3:01:46 PM