Edimax Technology Edimax PS-3103P - Manual (Page 61)

54
6. You have now successfully created the print queue
that your print server will serve. Press the Escape key
until the Available Options main menu is displayed.
7. Select Print Server Information.
8. Press the Insert key to add a new NetWare print
server object. The print server name can be identical to
the PSxxxxxx name printed on the label of the print server.
9. Press Enter to select the newly created print server.
10. Select Print Server Configuration.
11. Select Printer Configuration.
12. Select Printer 0 (or Printer 1, Printer 2), and press
Enter, then select LPT1 (or LPT2, LPT3) in the Type field.
If your print server is with only one port, you do not need
to configure this Type field.