Edimax Technology Edimax PS-3103P - Manual (Page 110)

103
8.8 Configuring DHCP Parameters
The print server can be configured as DHCP server to
provide dynamic IP addresses assignment. The DHCP Cfg
page allows you to set.
The DHCP server startup, which determine if the print
server will act as DHCP server. If this item is set to Auto,
the print server will detect if there is any other DHCP
server on the network when it boots up. If there is no
DHCP server on the network, then the print server will
configure as DHCP server itself; otherwise it will disable
this function.
DHCP setting is used to configure TCP/IP parameters that
will be assigned to a DHCP client. If this item is set to
Auto, the print server will determine all TCP/IP parameters