Edimax Technology Edimax PS-3103P - Manual (Page 34)

27
3.5 Client Installation and Setup
*PLEASE FIND THE UTILITY MANUALLY FROM CD-ROM DRIVE’S
ROOT DIRECTORY OR DOWNLOAD IT FROM EDIMAX WEBISTE.
IF YOU HAVE ANY QUESTION PLEASE CHECK WITH EDIMAX
LOCAL TECHNICAL SUPPORT TEAM.
The Client Installation Program is a wizard driven procedure which
will perform the following tasks:
„
Install client utilities and drivers into your PC.
„
Automatically add all Network Ports to your PC.
The network port driver supports network protocol auto-detection. It
will automatically select an available network protocol (TCP/IP, IPX or
NetBEUI) of the client computer to connect to the print server.
Since both the print server side and client side support multi-protocols,
the configuration process of the client side is fully automatic.
After the installation, perform the standard “Add Printer” procedure
and choose the print server’s “Network Port” in the “Available Ports”
list. You can test printing from the PC to the print server as your local
printer.
The Client Installation can be performed on Windows
2000/XP/2003/Vista with the same user interface. Before installation,
please confirm that your PC has already connected to the network
and installed at least one network protocol. Note that the following
steps are running in Windows XP, for other Operation Systems the
procedures are similar.
1.Please execute the Client installation software manually.