Edimax Technology Edimax PS-3103P - Manual (Page 109)

102
8.7 Setting IP Address
The IP Cfg page allows you to configure the IP
address where the print server is to be located. The print
server will obtain its IP address automatically by the
protocol DHCP, BOOTP, RARP if you configure the IP
address as Automatic. Click Save to print server button to
save the configuration to the print server.
The print server will verify your password (it will
ignore the User Name item) when you save the
configuration. Make sure to reset the print server
(described in section 8.13) to let the changes take effect.