Powerfix Z29760B - Manual (Page 6)

6 GB/IE
Included items
1 Vacuum base vice
1 Operating instructions
Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS
IN A SAFE PLACE FOR FUTURE REFERENCE!
CAUTION! DANGER OF INJURY! When working with
hand-held electrical power tools you can be seriously injured
if the clamped workpiece slips or becomes loose. Never work
on a clamped workpiece using hand-held electrical power tools.
Check the product before each use for any damage. Do not
use the product if you discover it is damaged in any way.
Check all threaded connections on the product for proper
seating before each use.
Check regularly the lever suction pad for proper seating and
retighten if necessary.
Attach the vice to a smooth, stable, flat, undamaged surface,
free of dust and grease.
The vice is an aluminium injection casting and therefore is only
impact resistant to limited extent.
Do not use extension tubes on the tommy bars. There is the
danger of overloading (fracturing) the spindle.
Wear safety gloves and glasses.
Fixing in place
1. Place the vacuum base vice down on to a suitable flat, smooth
surface.
2. Turn the suction pad lever 5 anticlockwise as far as it will go
to fix the suction pad 7 in place.
Note: If you fix the suction foot 7 in place directly at the
edge of the bench, you will be able to clamp long workpieces
vertically to work on their ends.
Turn the suction pad lever 5 clockwise to release the suction
pad 7 .