Powerfix Z30225 - Manual (Page 46)

46 GB/MT
Before Initial Use / Use
Attaching the repair device
Push the fixing clamp 11 onto the mounting rod 10 , set
the desired height and tighten the fastening screw 12
clockwise.
Insert the ball joint of the repair device 15 into the
corresponding recess of the fixing clamp 11 .
Fix the repair device 15 in place by tightening the fasten-
ing screw 16 clockwise.
Mounting the magnifying glass
Push the fixing clamp 7 on to the mounting rod 10 and
set the desired height. Tighten the fastening screw 8 by
turning it clockwise.
Insert the ball joint 5 into the corresponding recess
and tighten the fastening screw 6 for the ball joint 5
clockwise (Fig. A).
Use
Using the Precision Engineer’s LED
Magnifying Glass
Turn the retaining screws 19 on the alligator clips 18 in a
clockwise direction. Clamp the item to be repaired with
the alligator clips
18 in the repair device 15 .