Powerfix PBMP 30 A1 User Manual

Page 29

- 26 -

Now push the pump

onto the mounting

so that the drive shaft

projects into the thread of the drive shaft

, and the pins of the mounting

are located in the reception holes on the pump

Let the drill

start to run in a clockwise rotation and at low revolutions

and then guide the pump

straight onto the drive shaft

. The drive

shaft

is thereby secured to the pump

Attach the suction hose to the connection

and the pressure hose to the

connection

. Pay heed to the direction of flow

detailed on the

pump

When using a chuck with SDS fitting and the long drive
shaft r...

Attach the long drive shaft

into the chuck.

Insert the electric drill

, with the pre-assembled drive shaft

in the

chuck, into the mounting

Tighten the cross-headed screw on the mounting

firmly, so that the drill

cannot jolt around.

Now push the pump

onto the mounting

so that the drive shaft

projects into the thread of the drive shaft

and the pins of the mounting

are located in the reception holes on the pump

Allow the electric drill

to run with a clockwise rotation and low revoluti-

ons and guide the pump

straight on to the drive shaft

. With this the

drive shaft

will be fixated onto the pump