Powerfix Z29760B - Manual (Page 22)

22 GB/MT
Fixing in place / Use / Cleaning and care
Q
Fixing in place
1. Place the vacuum base vice down on to a suitable flat, smooth
surface.
2. Turn the suction pad lever 5 anticlockwise as far as it will go
to fix the suction pad 7 in place.
Note: If you fix the suction foot 7 in place directly at the
edge of the bench, you will be able to clamp long workpieces
vertically to work on their ends.
j Turn the suction pad lever 5 clockwise to release the suction
pad 7 .
Q
Use
Q
Clamping and releasing a workpiece
1. Turn the vice into the desired position and fix the ball joint 6
in position with the ball joint tommy bar 8 .
2. To open the jaws 2 turn the vice jaws tommy bar 3
anticlockwise.
3. Place the workpiece between the jaws 2 and clamp it by
turning the vice jaws tommy bar 3 clockwise. Ensure that the
workpiece is tightly clamped.
j You can now work on the workpiece.
j After completing work on the workpiece, release it by turning
the vice jaws tommy bar 3 anticlockwise.
Q
Cleaning and care
j Clean the product with a dry, fluff-free cloth.
j Never use aggressive or corrosive cleaning agents, as they
may damage the product.