Powerfix MS 1000 W - Manual (Page 14)

Portable spotlight 1000 W
GB - Instruction manual Version: Portable spotlight-GB-10-2011_rev.1
5
6. Product overview
This chapter provides you with an
overview of the operating elements and
parts of the product as well as with a brief
description of function.
Fig. 1: Product overview
Item Description Function
1 Handle Used to carry the
portable spotlight.
2 Spotlight
housing with
safety cover
Lamp unit
3 Mains cable For the power
supply, comprising a
cable and an
earthed plug.
4 Stand Provides stable
footing.
5 Fastening
screws
To connect the
spotlight housing to
the stand.
6 Adjusting
screw
To adjust the angle
of illumination.
Fig. 2: Components of the portable spotlight
7. Start-up and operation
IMPORTANT: This chapter explains
the basic actions necessary in order to
start up and use the portable spotlight.
7.1. Insert the halogen lamp
WARNING: Risk to life and limb
from electric shock
Disconnect the earthed plug from the
mains socket before any cleaning or
servicing work.
1 Open the safety cover
- Using a suitable screwdriver, loosen
the two cross-head screws.
Fig. 2: Cross-head screws
- Open the safety cover to the front.
2 Insert the halogen lamp
- See section 9.3
3 Close the safety cover
- Close the safety cover and tighten
the screws making sure the seal sits
correctly.
7.2. Using the portable spotlight
WARNING: Fire hazard
Do not use the portable spotlight in close
proximity to flammable objects. Maintain a
safety clearance of at least 1 m.
The angle of illumination of the spotlight
housing (see Fig. 1, item 2) can be
adjusted vertically. To change the angle
of illumination, loosen and adjust the
spotlight housing (see Fig. 1, item 2) with
the adjusting screws (see Fig. 1, item 6).
# 14