Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - Manual (Page 25)

]
Enter the “User” and “Password” fields with the account and password provided
by the ISP. If the “Mail after dialed” check box is checked, the mail will be automatically
sent when connected automatically to the ISP.
^
If the mail server needs authentication, the “Password” check box needs to be checked
and password information, entered.
_
Enter the sender’s email address in the “Sender email” field and recipient’s email
address in the “Receiver email” field.
`
The “Subject” field can be modified.
a
Confirm by clicking on the “Save” button
to save the settings.
If the i-WATCHER and ADSL modem are
connected by a hub, the administrator
can select ”Dial Now” to perform the connect
operation. On the contrary, if the i-WATCHER
and ADSL modem are connected directly,
then there is a need:
‧ To power off the i-WATCHER,
‧ To connect to the ADSL modem,
‧ To power-up the i-WATCHER,
‧ For the i-WATCHER to start dialing.
‧ Once connected, mail the IP address information to the preset e-mail address.
‧ After 10 times of failed try connections, it aborts the dialing operation and the
administrator can reconnect it to the LAN, access it, to find the cause.
Note:
If the PPPoE option “Mail after dialed” is selected, and when PPPoE dials in to the
ISP, a mail that contains the Dial Up ISP Address / Netmask / Gateway address / DNS
Server address will be mailed to preset the e-Mail address.
8-5. Audio Setup
8-5-1 Audio Configure
For fixed Audio option users: Client Configure:
Check the “Audio format ”
check box to select “PCM” or “Adpcm” If the check
box is not checked, default setting will be “PCM”!
Check the “Audio On/Off “ button for select
“On” or “Off “mode for audio enabled.
Server Configure:
Check the “Server Configure ”
Check box to select Audio “on” or “off” !
If the check box is not checked, default setting will be “off”!
25