Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - Manual (Page 22)

8-3-5. FTP uploads when motion detected.
The motion-detected images can also be uploaded to FTP server. The procedures are as
follow:
X Enter the IP address or domain name of the “FTP Server”.
Y Enter the “Username” and “Password” of the FTP server.
Z Certain FTP servers need an “Account” field. Leave it blank if it is not needed.
[ Enter the “Remote folder” upload path information for saving the images.
\ Confirm by selecting the [Save Settings] option to save the settings.
8-3-6.Alert OUT Setup
When the Alert OUT function is enabled ,
and a motion detected, a message will be
send to Mail or Ftp site by manual setting
Note. About GPIO function, we only provides a set to be possible to use
Please check the image what GPIO IN/OUT may use.
GPIO IN GND VCC GPIO OUT
Enable
8-4.Alert IN Setup
8-4-1.Alert IN Setting
When Alert IN function is enabled, the user
can setup the mail function to send the
Motion-detected images to the preset mail
address when extra device triggered.
The procedures are as follow:
X Motion Detect set to “Enable” state.
Y Equipment Extra Device for detected about event trigger.
22