Maintenance / cleaning, Troubleshooting – Silvercrest SDDD 7 A1 User Manual
Page 155

SilverCrest SDDD 7 A1
English - 153
Maintenance / cleaning
The DVD player (A) and monitor (B) do not contain any parts within the screen housing that require
user maintenance or cleaning. Never attempt to open the housing of the device, as this will void
your warranty. No liquids must penetrate the interior of the device.
Before cleaning, always remove the power adapter (G) from the wall outlet and disconnect all
cables.
Only use a clean, dry cloth for cleaning.
Do not use any solvents or abrasive or astringent cleaners.
A conventional screen cleaner is recommended for cleaning the screen.
Only use a soft, lint-free cloth to clean the screen and never abrasive sponges which can
damage the screen surface.
Make sure that no water droplets remain on the housing after cleaning. This could result in
permanent colour distortions.
Do not expose the screens to direct sunlight or ultraviolet radiation.
Storage when not using the product
When not using the device for a long time, it is recommended to recharge the
battery from time to time. This ensures a longer battery endurance.
Store the device in a dry, cool place. To protect against dust, we recommend
storing the device in the travel bag (E) supplied
Troubleshooting
Device does not work in battery mode
The built-in battery may be flat. Connect the power adapter (G) or car adapter (H) and charge
the battery.
"NO DISC" displayed
Check that there is a DVD/CD in the drive.
Check that the DVD/CD has been correctly inserted with the printed side facing upwards.
Poor-quality or no playback
Check if the playback media is dirty or scratched.
Remote control not working/not working correctly
Make sure the distance between the device and the remote control is not too great.
Change the angle of the remote control to the device.
Insert a new battery of the same type. For more on this, see the "Replacing the battery" section.