Silvercrest SDDD 7 A1 - Manual (Page 153)

SilverCrest SDDD 7 A1
English - 151
PASSWORD
The DVD player (A) is provided with a password from the factory. That password is: 1234.
You can change the password here. The procedure is as follows:
 Select "CHANGE" and confirm by pressing ENTER.
OLD PASSWORD: Enter the existing password here using the numeric keys on the remote control.
If the password has not yet been changed, enter the default password of
1234. Correctly entering the existing password will activate the next input
field.
NEW PASSWORD: Enter a new four-digit number here using the numeric keys. The next input field
will be activated after the input.
CONFIRM PWD: Enter the new four-digit number again to confirm. The OK input field will be
activated.
 Confirm by pressing ENTER to apply the new password.
Master password: In case you ever forget your password, there is an option to enter a new
password by using the master password 1369 only. Enter this password as "OLD PASSWORD"
and set up a new password as described above.
Picture settings on the monitor (MODE)
Press the MODE button (31) on the monitor (B) to change the picture settings on the monitor. The
following settings are available:
 "BRIGHT"
 "CONTRAST"
 "COLOR"
 "LANGUAGE" (e.g. "ENGLISH")
 "RESET"
Pressing the MODE button (31) again opens the second picture settings menu. Here you can
change the picture format.
 "SCREEN 16:9"  "SCREEN 4:3"
Using the  buttons (29, 30) on the monitor (B), choose the desired option which will then be
displayed in red with a preceding hand icon. You can change the settings using the  buttons
(26, 27) on the monitor (B). Confirmation of the input is not required. The menu disappears after a
short time and the input is saved automatically.