Silvercrest SDKT 1.76 A1 - Manual (Page 137)

SilverCrest SDKT 1.76 A1
English - 135
On/Off
This will enable or disable the Direct Call function.
Press the  or  directional control buttons [4] to select the desired status. To save the selected
setting, press the right display button [3].
Edit
Here you can edit the saved phone number. Press the right display button [3] to save it.
Room Monitor
This function allows monitoring a room while the user is not at home. The user can call home and
monitor the room where the handset is located. To do so, the user must save the phone number that he
will call from.
While enabled, the display will show “Room Monitor” underneath the date and time.
The requirement for this feature to work is that both phone lines must have the Caller ID
function enabled.
If the Room Monitor is enabled on multiple handsets for the same phone number, the
handset with the lowest handset ID will respond if a call is made to the room monitor.
If no phone number has been saved, the only available menu option will be “New”. If a
phone number has been saved already, the items “On/Off” and “Edit” will be shown.
New
This allows adding the phone number from which you want to call. Input the phone number via the
numeric buttons [6]. Press the right display button [3] to save it.
On/Off
This will enable or disable the “Room Monitor” function.
Press the  or  directional control buttons [4] to select the desired status. To save the selected
setting, press the right display button [3].
Edit
Here you can edit the saved phone number.
Press the right display button [3] to save it.