Silvercrest SDKT 1.76 A1 - Manual (Page 131)

SilverCrest SDKT 1.76 A1
English - 129
Settings
Press the right display button [3] followed by the 1 button to open the “Settings” menu.
Language
Press the  or  directional control buttons [4] to select the desired language from the list. Press the
right display button [3] to confirm your selection.
A confirmation beep will sound.
Registration
Register a handset (Register)
To register a handset with the base, proceed as follows:
 Press the  or  directional control buttons [4] to select the base from the list where you
want to register the handset.
 Enter the 4-digit PIN (default 0000).
 Press and hold the Pager button [19] on the base as long as necessary (approx. 20 seconds)
to establish the connection. This is indicated by a confirmation beep.
De-register a handset (De-register)
This menu items allows you to de-register a handset that is currently registered with the base. Proceed
as follows:
 First enter the 4-digit PIN (default 0000).
 Press the right display button [3] to confirm your input.
 Enter the number of the handset that you want to de-register (e.g. 1).
 Press the right display button [3] to confirm your input.
 A confirmation beep will sound.
 Instead of the name of the handset, the de-registered handset display will show “Not
Register”.
It is not possible to de-register the handset you are using.
Select Base
This allows you to select the base where you want to register a handset. As you will normally have one
base only, you can use the default setting “Auto”. Where several bases are available, you can select
the desired base manually from the list.