Handling and use – Silvercrest SAR 28 A1 User Manual

Page 109

105

Handling and use

SAR 28 A1

GB
MT

Further settings using the SEL button (EQ/LD/TA/AF)

♦

Hold down the SEL

button for about 2 seconds and then keep pressing

the SEL button until the required function is shown on the display.

♦

Turn the multi-controller

to change the settings of the menu item dis-

played.

TA - Enabling / disabling Traﬃ

c Announcement (traﬃ

c information)

TA ON: If TA mode is enabled, the device immediately switches from other sta-
tions or operating modes to the radio station that is currently transmitting traﬃ c
information.

NOTE

►

When the TA function is enabled, you can only search for or save stations
that are transmitting traﬃ c information. Stations that are transmitting traﬃ c
information signals are denoted in the display by TP.

TA OFF: The TA function is disabled.

AF - Enabling / disabling Alternative Frequencies

AF ON: When the AF function is enabled, the device searches for the current
station’s optimum frequency.

AF OFF: The AF function is disabled.

EQ - Equaliser

♦

Turn the multi-controller to select one of the FLAT, CLASSIC, ROCK, POP or

EQ OFF settings. No equaliser is enabled if EQ OFF is set. The equaliser
setting is shown at the bottom of the display.

SUBW - Subwoofer

You can connect an active external subwoofer to produce a more powerful bass
eﬀ ect.

♦

Turn the multi-controller to enable the bass eﬀ ect (SUBW ON) or disable it
(SUBW OFF).

AVOL - Set the volume when radio is switched on

♦

Turn the multi-controller to set the volume level used when the radio is turned on.

IB_85465_SAR28A1_LB5.indb 105

06.12.12 16:54