Using the device, Face plate, Gb mt – Silvercrest SAR 28 A1 User Manual

Page 106: Inserting the face plate, Removing the face plate

102

Using the device

SAR 28 A1

GB
MT

Using the device

Face plate

You are able to remove the face plate from your device as an anti-theft measure.
Do not keep the face plate in your vehicle after removal.

NOTE

►

Always keep the face plate in its case

to protect it.

Inserting the face plate

♦

First, place the face plate with its right-hand
side against the holder

♦

Then press the left-hand side into the frame until
the locking mechanism

engages.

Check to ensure that the face plate is installed cor-
rectly and securely in the frame. Not installing the
face plate correctly can result in malfunctions when
using the device.

Removing the face plate

♦

Press the

button to unlock the face

plate. The left-hand side of the face plate jumps
forwards slightly.

♦

Remove the face plate by its left-hand side ﬁ rst,
then by its right-hand side.

IB_85465_SAR28A1_LB5.indb 102

06.12.12 16:54