Silvercrest SAR 28 A1 - Manual (Page 101)

97
Installation
SAR 28 A1
GB
MT
Accessories (see rear fold out fl ap)
Figure D:
29 Case for face plate
30 Installation bracket
31 Key for installation bracket
32 Anchoring plate (including securing material)
Installation
WARNING
Damage can be caused when installing the device!
► If possible, have the device installed by a qualifi ed technician.
► If you wish to install the device yourself, follow the instructions for connec-
tion and installation for safe, fault-free use of the device.
Connection
CAUTION
Using incorrect connections can cause damage to the device.
► For installation, use the device's ISO connections. The vehicle-specifi c ISO
adapters you may require can be sourced from a specialist workshop, from
a local dealer or from a general store's technical department. Using other
connector types voids the warranty.
Assignment of the ISO connections
The view of the plug connector is from behind.
1 3 5 7
2 4 6 8 ISO A
(power supply
assignment)
Assignment
1 Not used
2 Not used
3 Not used
4
Steady plus 12 V
(terminal 30)
5 Antenna power
6 Not used
7
Ignition circuit positive 12 V
(terminal 15)
8
Negative (-)
ground (terminal 31)
IB_85465_SAR28A1_LB5.indb 97 IB_85465_SAR28A1_LB5.indb 97 06.12.12 16:54 06.12.12 16:54