Installation, Removing the device, Gb mt – Silvercrest SAR 28 A1 User Manual

Page 105

101

Installation

SAR 28 A1

GB
MT

CAUTION

Possible damage to the cable!

►

To avoid damage, observe the position of the cables when sliding the
device into the bay.

♦

Carefully push the device into the installation bracket

until it locks into

place.

♦

After all the connections have been established, press the RESET

button

for about 6 seconds with a ballpoint pen or other sharp object.

♦

Attach the face plate as described under “Installing the face plate”.

Removing the device

To remove the installed device, proceed as follows:

♦

Insert the right and left keys

into their respective slots on the sides of the

device. (The tabs are now bent back).

♦

Pull the device out.

IB_85465_SAR28A1_LB5.indb 101

06.12.12 16:54