Correcting computer images, Adjusting the volume – Epson 7900p User Manual

Page 47

Projecting

Correcting Computer Images

If you’re connected to a computer and the image doesn’t look right,
press the

Auto

button on the remote control (or the

Auto/Enter

button on the projector’s control panel). This automatically resets the
projector’s tracking, sync, resolution, and position settings.

If vertical stripes appear in the projected image and the

Auto

button

doesn’t correct the problem, hold down the

Shift

button on the

projector’s control panel while pressing either the

Tracking +

or the

Tracking –

button.

If the image appears fuzzy or flickers and the

Auto

button doesn’t

correct the problem, hold down the

Shift

button while pressing either

the

Sync +

Sync –

button.

Adjusting the Volume

You can use the buttons on the remote control or projector to increase
or decrease the volume for the projector’s built-in speaker or external
speakers connected to the projector. Press the

button to increase

the volume, or the button to decrease it.

note

You must be projecting an
image for this button to have
any effect. The

Auto

button

works only with computer
images.

note

You can also adjust the
volume using the projector’s
menu system. See page 73.