Epson 7900p - Manual (Page 105)

Maintaining the Projector 105
4. Turn the projector over and remove the air filters at the side and
bottom of the projector.
5. Insert the two new air filters. They should click into place.
6. Insert the screwdriver supplied with the spare lamp, or some other
flat-tipped screwdriver, into the space beside the air vent. Gently
slide the lamp cover until the arrow on the cover is aligned with
the arrow on the projector. Then lift the cover off.
Slide the filter up
here . . .
. . . and here
1
Insert the screwdriver here