Epson GT-30000 - Manual (Page 11)

Scanner Settings
7
Paper Source
Choose the desired paper source from the Paper Source list.
Automatic Scan from the feeder if pages are present; otherwise, scan from the flatbed.
Flatbed Scan from the flatbed only, regardless of whether or not pages are present in the feeder.
Feeder Scan from the feeder if pages are present; otherwise display a message.
Duplex Scan both sides of each page in the feeder, if pages are present; otherwise, display a
message.
Page Size
Choose the desired page size from this drop-down list box. This will ensure that you scan the entire image
without over-scanning. If the size you need is not available, choose Scanner’s Maximum and. then use the
Scan Area dialog box (page 14) to adjust the scanning area to the desired size.
Page Layout
Under Page Layout, click Portrait if the text or image appears across the narrow dimension of your pages.
Click Landscape if the text or image appears across the wide dimension of your pages.
Paper Orientation
Under Paper Orientation, click the scanning orientation that corresponds to the way you are scanning your
pages, either top, bottom, right, or left edge first.
Note
The orientation of your pages depends on whether you are scanning from the
feeder or flatbed. Choosing the correct combination of Page Layout and Paper
Orientation results in images that are right-side-up.
More
Click More to display the Advanced Settings dialog box, described on page 8.
Area
Click Area to display the Scan Area dialog box, described on page 14:
OK
Click OK to save the settings you made and close the Scanner Settings dialog. You may now begin
scanning with your new settings.
Default
Click Default to restore the default settings to this dialog box, the Scan Area dialog box, and the
Advanced Settings dialog box.
Cancel
Click Cancel to close the Scanner Settings dialog box without saving any of the changes you have made in
this dialog, the Scan Area dialog box, or the Advanced Settings dialog box.