EVGA 730I - Manual (Page 67)

Configuring the BIOS
EVGA
57
change the FSB memory, and memory timing, go to the FSB & Memory
screen.
FSB & Memory Config
Select
FSB & Memory Config
from the Frequency/Voltage Control menu and
press Enter to display the FSB & Memory Config menu. This menu provides
the means to set FSB memory, and memory timing.
Figure 5. FSB & Memory Config Menu
FSB - Memory Clock Mode
‰ Use the Page Up and Page Down keys to scroll through the FSB and
Memory Clock Mode options. The options are:
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Parameters Settings Current Val u e
CPU Freq, MHz 3000.0 3000.0
CPU Multiplier 9X 9X
FSB – Memory Clock Mode [Auto]
x FSB – menory Ratio
Auto
x FSB (QDR), MHz
Auto 1333.3
Actual FSB (QDR), MHz 1333.3
x MEM (DDR), MHz
Auto 800.0
Actual MEM (DDR), MHz 800.0
` Memory Timing Setting [Press Enter]
Item Help
Main Level
``
“Auto” realizes the
complete optimized
memory settings
Optimized memory
settings by allowing
X% CPU overclocking
CPU overclocking may
require manual
overvoltaging of the
CPU to improve system
stability
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config