Resources controlled by, Irq resources, Pci/vga palette snoop – EVGA 730I User Manual
Page 61
EVGA
51
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)]
if you want the BIOS to automatically populate
these fields. If you select
[Manual]
so you can assign the resources,
IRQ
Resources
is enabled for input.
IRQ Resources
To enable this field for input, set
Resources Controlled By
to
[Manual]
. With this field enabled, press
Enter
to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus
specification. Use PCI/ISA PnP for devices compliant with the plug-and-play
standard, whether designed for PCI or ISA Bus architecture.
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or
disable the Palette Snoop function.
IRQ-5 assigned to
[PCI Device]
IRQ-7 assigned to
[PCI Device]
IRQ-9 assigned to
[PCI Device]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
Resources Controlled By
[
Manual
)]
IRQ Resources
[Press Enter]
Resources Controlled By
[
Auto(ESCD)
]
x
IRQ Resources
Press Enter