Sealey GSS150819SL - Manual (Page 2)

3. CONCRETE PLINTH SLAb
4. TOOLS REQUIRED
Concrete Slab: It is recommended that your new shed is secured to a concrete slab as shown below.
Please ensure that your site is level. It is recommended that your slab is 100mm thick, you use a plastic
membrane and a suitable reinforcing mesh. We recommend that you make your slab 100mm bigger than the
base dimensions of your shed. This will allow for a 50mm edge around your shed. We recommend that you
slope the 50mm edges downward by 10 mm so that rain water will drain away from your shed.
5. CONTENTS
Check contents: Lay out all components with the part numbers facing upwards and check off against the parts
lists on the next four pages. In the unlikely event of a missing component please contact you local Sealey dealer.
GSS150819SL Issue: 1 - 30/08/12 © Jack Sealey Limited Original Language Version