Sealey GSS150819SL User Manual
Page 15
GSS150819SL Issue: 1 - 30/08/12
© Jack Sealey Limited
Original Language Version
7.6
INTRODUCTION OF PRE-ASSEMbLED DOOR (to front panel)
7.6.1 Slide the door into roller retaining tracks as indicated, before fitting hasp item C4.
7.6.2 Fit the hasp item C4 with 4mm diameter x 10mm long “pop” rivets into pre-punched holes.
Section
through track.
23H
20K
C2
“pop” Rivets
See also other documents in the category Sealey Equipment:
- SA0615 (7 pages)
- SAC2203B (6 pages)
- SAC2203B (6 pages)
- SAC2203B (8 pages)
- SSC12710D (14 pages)
- SAC0610E (4 pages)
- SAC10030 (4 pages)
- SSC11003 (9 pages)
- SAc3503B (6 pages)
- SSQC2409 (4 pages)
- SSQC2409 (4 pages)
- SSQC2409 (5 pages)
- SA1565 (5 pages)
- SA5055 (4 pages)
- SAC3203B3PH (6 pages)
- SAC72775BLN (6 pages)
- SAC55075B (5 pages)
- SAC03290 (3 pages)
- SAC05020 (4 pages)
- SAC106B (3 pages)
- SAC2203BLN (6 pages)
- ADB3000 (2 pages)
- SAC89025VLN (6 pages)
- CBOX2212V (1 page)
- PW2000 (5 pages)
- PW1712 (3 pages)
- PW4000 (4 pages)
- PW2500 (5 pages)
- PW5000 (5 pages)
- PWM1300 (7 pages)
- PWM2500SP (6 pages)
- LC300ST (2 pages)
- LC800ST (2 pages)
- LS1050V (4 pages)
- LS575VH (3 pages)
- LS520H (3 pages)
- LS450H (2 pages)
- LSH180V (2 pages)
- TP16 (1 page)
- TR3000 (2 pages)
- TP17 (2 pages)
- AK460DX (3 pages)
- AK466D (2 pages)
- TP69 (2 pages)
- TP6906 (3 pages)