Fig.8, Trouble shooting, Fig.7 fig.9 – Sealey SAC2203BLN User Manual
Page 4
![background image](https://www.manualsdir.com/files/847852/content/doc004.png)
fig.8
5.6 RECOMMENDED OILS
synthetic oil suitable for temperatures ranging from -5°c to 45°c:
viscosity 5W50. We do not recommend using mineral oil in this
compressors.
Part No. Qty
Description
fso1
1ltr x 12
compressor oil fully synthetic
fso1s
1ltr x 1
compressor oil fully synthetic
fso5
5ltr x 1
compressor oil fully synthetic
5.7 IMPORTANT WARNING - Air contaminants taken into the
compressor will affect optimum performance.
example: Body filler dust or paint over-spray will clog the pump
intake filter and may cause internal damage to pump/motor
components. Please note that any parts damaged by any type of
contamination will not be covered by warranty.
6. TROUBLE SHOOTING
Fault
Cause
Remedy
Pressure drop in
the tank.
Air leaks at
connections.
run compressor to max.
pressure, switch off.
Brush soap solution over
connections and look for
bubbles. tighten connections
showing leaks. If problem
persists contact Authorised
service Agent.
Pressure switch
valve leaks when
compressor is
idle.
non-return valve seal
defective.
discharge all tank pressure.
referring to fig.9, unscrew
valve cap 'A'. clean rubber
disc 'B' and its seat. refit all
parts accurately.
compressor stops
and does not
restart.
Power failure.
Motor failure.
check electricity supply and
fuse.
contact Authorised service
Agent.
compressor does
not stop at max
pressure.
Pressure switch fault.
contact Authorised service
Agent.
compressor does
not reach max
pressure.
filter clogged.
Head gasket or valve
fault.
replace filter element.
contact Authorised service
Agent.
compressor noisy
with metallic
knock.
low oil level.
Bearing or piston
damage.
turn off and top up oil
immediately.
contact Authorised service
Agent.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
fig.7
fig.9
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email [email protected] or phone 01284 757500.
Original Language Version
sAc2203Bln.V2 Issue: 1 - 07/11/13
Jack sealey limited
Environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
dispose of this product at the end of its working life in compliance
with the eu directive on Waste electrical and electronic equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. contact your local solid waste
authority for recycling information.