Sealey TP99/205 - Manual

InstructIons for:
SOLVENT TRANSFER PUMP
205LTR DRUM
MoDEL no:
TP99/205.V3
thank you for purchasing a sealey product. Manufactured to a high standard this
product will, if used according to these instructionsand properly maintained, give
you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
2. INTRODUCTION
4.1 Keep the pump clean and flush with clean water each time
before fitting to a fresh barrel.
note: nut ‘c’ should be tight enough to effect a seal on the plunger
shaft but not so tight that it locks the shaft. It may also
require adjustment according to the fluid being pumped.
3. OPERATION
4. MAINTENANCE
3.1 Insert the spout ‘A’ into the head of the pump and tighten the
associated ring nut. Do not overtighten.
3.2 If the drum neck has a male (external) thread, keep the
adaptors together and screw female adaptor ‘E’ onto the main
thread as shown on the right.
If the drum neck has a female (internal) thread, use adaptor ‘D’
on its own and screw it into position. see lower right.
3.3 Where the tank neck has no thread at all, universal adaptor
‘f’ can be used. this is not supplied and must be ordered
separately (Part no: tP99/1). remove adaptors D & E. Drop
the legs ‘I’ into the tank neck and rotate the larger ring ‘H’
clockwise to get the legs to grip the neck internally.
3.4 When the adaptor is securely in place insert the main body
of the pump and adjust it’s height and rotation. to secure the
pump tighten the thumbscrew ‘D1’ or ring ‘G’ as appropriate.
3.5 the pump will prime within a maximum of four strokes. Do not
operate the plunger ‘B’ to its extreme top position, but
operate within a convenient lift height. the amount of discharge
per stroke can be controlled by the lift height.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park ,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
email
Original Language Version
tP99/205.V3 Issue: 1 - 22/11/11
Manufactured from nylon and polypropylene with PtfE seals
and features a stainless steel plunger rod. ready-to-go self
priming pump makes the unit quick and easy to use. suitable
for use with cellulose thinners, antifreeze, AdBlue, brake cleaner,
detergents, mild acids and gun wash. universal adaptor (tP99/1)
is available for drums fitted with a plastic pouring spout.

WARNING! DO NOT operate using flammable liquids in a confined space, the
area should have adequate ventilation.
1.1 If pumping flammable liquids, avoid proximity to naked flames or welding
operations.
1.2 Wear appropriate protective clothing when pumping solvents. We recommend
eye/face and hand protection, available from your authorised sealey dealer.
1.3 Ensure Health & safety, local authority, and general workshop practice
regulations are adhered to when using this equipment.
1.4 Ensure any spillages are dealt with immediately. failure to do so could lead to injury.
1.5 Keep children away from areas where solvents are being used.