Sealey RB460A - Manual

1. SAFETY INSTRUCTIONS
2. INTROdUCTION & SpECIFICATIONS
3. INSTAllATION
 dO NOT use the roof box if any parts are missing or damaged as this may cause failure or possible personal injury.
 WARNING! Due to the variety in design of vehicles, it is the users full responsibility to ensure no damage occurs whilst using this
roof box. Correct attachment of the roof box to a vehicle is critical and is beyond the control of the manufacturer, distributor, or
supplier.

WARNING! The user must secure the roof box, checking the security frequently when in use.
 WARNING! Avoid any protrusions beyond the side of the car as these may present a risk of injury to passers-by.
 dO NOT use the roof box for any purpose other than for which it is designed.
 WARNING! Drive carefully - Be aware of cross winds, sudden braking or hard cornering, reduce speed accordingly when using roof box.
 WARNING! This roof box is designed for temporary use only, remove when not in use and before going through a car wash.
 Before every use check the roof box for security of fittings or any sign of wear and tear. Replace any worn or damaged parts.
 Check the load is stable and uniformly distributed before transit. Use the supplied luggage straps.
 Be cautious of the load height and restrictions due to car park height barriers you may encounter.
 dO NOT exceed the weight limit stated in the roof box's specifications.
 WARNING! Remember the driver of the vehicle is responsible for the security and safety of the load carried.
 WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product,
but must be applied by the operator.
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: plEASE REAd THESE INSTRUCTIONS CAREFUllY. NOTE THE SAFE OpERATIONAl REQUIREMENTS, WARNINGS, ANd
CAUTIONS. USE THIS pROdUCT CORRECTlY, ANd WITH CARE FOR THE pURpOSE FOR WHICH IT IS INTENdEd. FAIlURE TO dO SO
MAY CAUSE dAMAGE ANd/OR pERSONAl INJURY ANd WIll INVAlIdATE THE WARRANTY.
INSTRUCTIONS FOR:
ROOF BOX METAllIC GREY 460/500ltr MAX lOAd
MODEL Nos: RB460A/ RB500A
The RB460A & RB500A roof boxes are manufactured from ABS and HIPS (High Impact Polystyrene) for strength, looks and durability. They
have a higher load capacity of 75kgs. Both models are finished in stylish metallic grey and benefit from triple point central locking. Model No.
RB500A is a full width box and benefits from both left and right side opening. Both of these roof boxes are supplied with the quick system for
fitting to most common size roof bars.
Model No: ......................RB460A ...........................RB500A
Capacity:........................460ltr ...............................500ltr
Maximum Load: .............75kg .................................75kg
Dimensions (LxWxH): ....1850x800x410mm ...........2000x900x410mm
3.1.
Make sure the roof bars are correctly spaced to accept the roof box and that they are the correct size to fit the metal hooks of the
roofbox, (See fig.1).
3.2.
The roof box must be lifted onto the vehicle by two people, (See fig.2).
Fig.1 Fig.2
Original Language Version
RB460A, RB500A Issue: 1 - 08/01/14 © Jack Sealey Limited