Miomare Multi-Function Shower Head Set - Manual (Page 5)

5 GB
Introduction / Safety notices / Installation
Multi-Function Shower Head Set
Introduction
Congratulations on the purchase of your
new product. You have selected a high
quality product. The installation/operat-
ing instructions are a part of this product. Before
installation please read through the whole of these
instructions and take note of the advice they contain
before you start the installation. These instructions
contain important information about installation,
settings and care. Keep these instructions safe and
if you pass on the product to anyone else please
pass on the documentation as well.
Intended use
The product is only intended for installation on taps
for baths and showers. Any use not specified or
product modification is prohibited and will result in
damage. Any form of use other than the stipulated
intended purpose can cause danger to life and
cause injury. The product is for private use only
and is not intended for medical or commercial use.
The manufacturer accepts no responsibility if the
intended purpose of this unit is not adhered to.
Parts description
1 Hand shower head
2 Spray setting button
3 Gasket
4 Shower hose tapered connection
5 Shower hose
6 Shower hose knurl connection
7 Gasket
Technical Data
Shower connector: G ½“
Shower hose: G ½“, length 175 cm
Scope of delivery
1 Hand shower unit
1 Shower hose
2 Seals
1 Instructions for installation/operation
Safety notices
DANGER TO
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unattended with the pack-
aging material. Suffocation hazard. Keep this
product well away from children. This product
is not a toy.
BEWARE OF ELECTRIC SHOCK!
Leaking or water discharge can
lead danger to life from electric
shock.
Be sure the water supply is shut off
CAUTION for existing hand showers with wa-
ter stop function. Otherwise there is a danger
of injury and / or damage to the product.
Installation
Note: Familiarise yourself with the product prior to
assembly. Carefully read the following assembly
instructions and safety advice. In the event of incor-
rect installation, all warranty claims – particularly
in relation to subsequent damage – are excluded.
Be sure the water supply is shut off Otherwise
there is a danger of injury and / or damage to
objects.
Follow these steps:
Unscrew the existing shower from the shower
hose of your fitting.
Place the seal 7 in the knurled shower hose
connection 6 and screw the knurled shower
hose connection 6 hand tight into the shower
hose of your fitting.
Place the seal 3 in the tapered shower hose
connection 4 and screw the tapered shower