Everpure 327 - Manual (Page 55)

Cold Drink Center (327/328) Operator’s Guide
3280020 Page 49 August, 2003
SELECT A FREEVEND MESSAGE
1. Press , then press until the display shows FREEV XX .
"XX" represents the current message number selected for the message that
displays when the machine is in freevend mode. Two dashes indicate that
the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To
do this, press and follow the procedure given in "Edit Custom Message"
on page 49
4. CONTINUE.
EDIT CUSTOM MESSAGE
1. Press , then press until the display shows EDIT MSG'S . Press
the number of the message you want to edit.
=
MESSAGE X is displayed (X
represents the message number you pressed).
NOTE
Custom message 8 represents the INSERT MUG message.
2. Press . The message text is displayed with the first character
flashing.
3. To view the message, press . The message scrolls across the
display. To stop the scrolling, press .
4. When the character you want to change is flashing, either enter it directly, or
use and to step through the character set until the desired
character is displayed. Use the arrow keys to highlight different characters.
See the section on the next page for an explanation of special keys and the
character set.