Everpure 150B D-Clor EV949812 - Manual

XS1B Aircraft Water Filter
Part No. EV941000
Premium Quality Water Filtration
Created for Use in Aircraft
XS1B Assembly
P/N EV941000 (1 pack)
BENEFITS
Improves aircraft water by reducing chlorine taste and odor •
and other off tastes and odors
Filters out dirt and other suspended matter
•
Vessel made of durable “300 Series” stainless steel •
Designed for use with all Everpure D-Clor™ Cartridges •
FAA-PMA Approved •
INSTALLATION TIPS
To service, shut off influent water supply, open service tap, •
remove the V-Band Clamp, and unscrew cartridge.
After replacing cartridge, air should be released from the top
•
vent.
Flush the cartridges by running water through filter at
•
full flow at the service tap for three minutes, or until
water runs clear.
OPERATION TIPS
Change cartridges as indicated on the cartridge data sheet. •
Always flush new filter cartridges at the time of •
installation.
INLET AND OUTLET CONNECTIONS
Bottom IN / Bottom OUT • Top Vent
Inlet and Outlet: 9/16-inch • — 18NF (3/8-inch tube union)
REPLACEMENT CARTRIDGES
All D-Clor™ cartridges reduce chlorine taste and odor, and •
other taste and odor while filtering out dirt and suspended
matter. See chart for different pressure drop characteristics.
In addition to reducing taste and odors, the 150GP cartridge
•
inhibits limescale build-up. Limescale prevention is particularly
important in applications involving hot water heaters and
coffee makers.
150B D-Clor™
Replacement
Cartridge
P/N EV949812
(12 Pack)
150G D-Clor™
Replacement
Cartridge
P/N EV949000
(12 Pack)
150GP D-Clor™
Replacement
Cartridge
P/N EV949212
(12 Pack)
150GY D-Clor™
Replacement
Cartridge
P/N EV949012
(12 Pack)
0
5
10
15
20
25
0 0.5 1 1.5 2 2.5
FLOW RATE (GPM)
INITIAL PRESSURE DROP (PSI)
PRESSURE DROP CHARACTERISTICS
S1B Shell Only
S1B w/150G cartridge
S1B w/150GP cartridge
S1B w/150GY cartridge
S1B w/150B cartridge
FAA-PMA APPROVED