Everpure 327 - Manual (Page 36)

Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 30 3280020
SELECT CARD READER AND OPTIONS
1. Press , then press until the current card reader is shown in
the display. Your choices are:
NO CARD , DUMB CARD , or MDB CARD .
2. Press to choose the desired card reader.
3. Press until one of the following is displayed (not available if NO CARD
is selected above):
REVALUE.ON
- Allows credit to be transferred onto the card
REVALUE.OFF
==J==
Credit cannot be transferred to the card
4. Press to display the desired choice.
5. CONTINUE.
SELECT MONETARY OPTIONS
This function lets you:
Depending on the coin mech and bill validator selected, some options below may
not be available.
1. Press , then press until the display shows CHANGE X.XX .
X.XX represents the largest denomination coin or bill that will be changed
without a purchase. Any non-zero value here will return all escrowed coins.
(Each coin denomination that the coin mech has a tube for is called an
ESCROWED coin because it can be returned.) When the coin return button
is pressed, all coins inserted will be returned provided there is a coin mech
tube for each of those coins, EXCEPT in the forced vend mode.
Set change return criteria
Set currency acceptance on low
change Set overbuy options
Set last bill stacking options
Set declining balance