Everpure 327 - Manual (Page 24)

Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 18 3280020
The Displays
The 10-character display performs two functions, and is referred to in this book as
"the display":
• It shows the customer's selection and how much credit is in the machine, as
well as the ready, service, and time of day messages.
• It provides information and feedback to the service person during mainte-
nance.
The Function Keys
The keys on the control panel can be used for up to three things:
Other Keys
The MOVEMENT keys on the control panel let you move inside a mode, and back
and forth between modes.
DISPLAY
These keys are your "legs", which let you move up and
down the list of tasks. They let you continue from one step
to the next in programming procedures.
This is your "activate" or "choose" key. It "opens a door" to
additional information and lets you begin a programming
task once you are inside of a mode. Sometimes, it is used
as a toggle switch to show you your choices during a pro-
gramming task.
This key can be used before running a function, or to
choose “ALL” in a multiple selection.
This is your "end" key. Pressing it one or more times will
move you back to the start of the mode, or all the way back
to the standby message.
THE NUMBER
You might be asked to
enter a numerical value.
Pressing this key will
enter a "5".
THE PRIMARY PURPOSE
This is the main job of the key. From the standby
message, it will allow you to enter a programming
mode. In this example, you can view stored sales
data.
THE SECONDARY PURPOSE
This is the key's "second job". For example,
this key can be used to delete a character
when you are editing custom messages.