Everpure IN-10 EV9100-08 - Manual

B E N E F I T S
A P P L I C A T I O N / S I Z I N G I N S T A L L A T I O N T I P S O P E R A T I O N T I P S
IN-10 In-line Filter
Designed for superior taste and odor reduction
IN-10 with 1/4” JG fittings: EV9100-06
IN-10 without fittings: EV9100-08
IN-10 with 1/4” JG fittings: EV9100-06
IN-10 without fittings: EV9100-08
Provides clear, fresh, quality ingredient water for
coffee, espresso and ice applications
Granular activated carbon reduces chlorine taste
and odor, which can cause coffee to taste bitter
Inhibits the formation of limescale, which can
shorten the life of equipment
In-line design is compact and installs out of sight
behind equipment
Available with quick disconnect fittings which
make installation fast and simple
Use 1/4” water line
Flush IN-10 cartridge by running water through
filter for three minutes at full flow
Change cartridges on a regular 6 month
preventative maintenance program
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Service flow rate must not exceed 0.75 gpm
Always flush the filter cartridge at time of
installation and cartridge change
For low volume, single pot coffee brewers with
flow rates up to 0.75 gpm
Capacity: 2,400 gallons (9,085 L)
EV9100-08