Sawing techniques, Cb a – Florabest FHE 710 A1 User Manual

Page 84

Sawing Off Small Branches

Set your saw cut of smaller branches (Ø

0-8 cm) from top to bottom, as illustrated.

Be aware of early breaking of the branch

if you have underestimated the size and

weight.

Be completely aware of the falling cut

material

Sawing Off Larger Branches

For controlled sawing of larger branches

(Ø 8-25 cm), first select a relief cut (see

cutting a).

This is made from below.

Saw a notch in the lower third of the

branch.

The actual length cut (see cutting b) is

again made from the top, as far as possi-

ble in line with the first cut so that the two

cuts meet.

Sawing Off Parts

For large/long branches, sawing off in

parts is recommended (see cutting a, b, c).

This is the only way to safely ensure the

point of impact of the cut material.

Clear away from the area in which you

are standing any parts that have already

been cut and are lying on the ground.

Sawing techniques

Be thoroughly aware of the danger of rebounding branches.