Florabest FLV 1200 A1 - Manual (Page 5)

5
GB
The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in con-
formity with its intended purpose.
General description
Scope of delivery
Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Implement case with verticuttor cylinder
and impact protector
• Aerating cylinder
• Upper handle bar complete with start-
ing lever, power plug, unlocking button
and firmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clamps
• Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
• Instruction Manual
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.
Overview
The most important functional
parts are illustrated on the
cover page.
A 1 Unlocking button
2 Starting lever
3 Upper handle bar
4a+b 4 screws and 4 wing nuts to se-
cure the bar
5 Collection bag
6 Impact protector
7 Lower bar
8 Implement case
9 Setting button
10 2 rear wheels
11 2 wheels
12 Machine cable terminal
13 Spanner
14 Tool holder
15 2 centre bars
16 Machine cable terminal
17 Electric cable
18 Cable strain relief
19 Machine cable
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
B
22 Fastening screw
C 23 Collection bag rods
E 24 Square receptacle
Functional description
The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality plas-
tic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Technical data
Electric Scarifier /
Aerator ...................... FLV 1200 A1
Motor input .............................. 1200 W
Rated voltage ........... 230-240 V~, 50 Hz
Protection Class ............................... II
Degree of protection .........................IPX4
Rotating speed of the tool (n
o
)
......................................3500 min -1 (r.p.m)
Cylinder width ..............................31 cm
Readjustment range for wear ...........9 mm