Florabest FLV 1200 A1 - Manual (Page 14)

14
GB
Trouble shooting
Problem Possible cause Remedy
Abnormal noises,
clatter or
vibrations
Foreign body on cylinder Remove foreign body
Damaged sprung tines or
cylinder knives
Exchange cylinder
Cylinder incorrectly mounted Install cylinder correctly (see chapter
on exchanging the cylinder)
Toothed-belt slip
Switch device off and pull power
plug. Remove the soil and grass
residues available.
Implement does
not start
No power
Check power socket, cable, line;
repair only by qualified electrician
ON / OFF switch defective
Repair by After-Sales Service Carbon brushes worn out
Motor defective
Motor fails
Blocked by foreign body Remove foreign body
Grass is too long
Mow beforehand; see chapter
“Operation”
Clogged discharge Clean discharge
Overload protection tripped Allow implement to cool down for
about 1 minute
Work result not
satisfactory
Sprung tines of aerator
cylinder worn out
Exchange cylinder
Knives of verticutor cylinder
blunt or damaged
Exchange cylinder
Toothed belt defective Repair by After-Sales Service
Transport Position or
incorrect Working Position
selected
Select Working Position 1 or
Readjust Position 2-4 (see chapter
“Setting the Working Positions)
Grass is too long
Mow beforehand; see chapter
“Operation”