Florabest FSG 85 B1 - Manual (Page 48)

48
GB
Technical specifications
Chain.sharpener.............FSG.85.B1
Nominal input voltage ......... 230V~, 50 Hz
Power consumption ............... max. 85 W
(S2: 15 min)**
Rated resting period ................. ca. 5 min
Safety class ..................................... II
Mechanical rating .......................... IP 20
Idle-running speed ...................5000 min -1
Disk speed ....................... max. 50 m/s*
Adjustment angle .............. 30° left / right
Grinding disk
dimensions ............................Ø 104 mm
diameter of bore ......................Ø 22 mm
Weight ..................................... 2.45 kg
Sound pressure level
(L
pA
) .....................83 dB(A); K
pA
=3 dB(A)
Sound power level (L
wA
)
measured ............96 dB(A); K
wA
=3 dB(A)
guaranteed ...........................99 dB(A)
Vibration (a
n
) .........3.05 m/s 2, K=1.5 m/s 2
* The grinding disk must be able to withstand
a circulation speed of 50 m/s.
** Do not operate the equipment for longer
than 15 minutes without interruption; then
take a rest break of 5 minutes.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
. Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
Safety Instructions
WARNING!
When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
and the risk of injury and fire.
Symbols in the manual
. Warning.symbols.with.in-
formation.on.damage.and.
injury.prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.