Epson C82305 - Manual (Page 9)

DIP switch 1 (interface operations)
The table below contains information on switch
functions, and the factory setting of each.
Table 1. DIP switch 1
Switch
Function O N OFF
Factory
number setting
1-1
I/F card enable/disable
Disable O N
(Note)
Enable
l - 2 Word length
l-3 Parity check 1
1-4 Parity check 2
I
8 bit 7 bit O N
OFF
See Table 4.
OFF
l-5
l-6
Baud rate 1
Baud rate 2
See Table 5.
O N
OFF
Note
Some printers have a selecting switch (or function) that
allows you to select between the optional and original
interfaces. If you install the interface card in this type of
printer, you should set DIP switch l-l on the interface
card to ON and also change the setting in the printer to
select the optional interface.
6