Epson C82305 - Manual (Page 5)

INTRODUCTION
The Serial Interface Card 032305 * /C82306 * is an interface
that allows asynchronous serial data communication
between a host computer and an EPSON printer.
This interface card offers the following features:
• Data transmission that can be set at either RS-232D
or 20 mA Current Loop levels (RS-232D has been
revised from the former RS-232C. Set the signal
levels for RS-232D the same as for RS-232C.)
• Handshaking protocol using X-on/X-off or DTR flag
control
• Selectable data word structure that allows you to
choose parity (Odd, Even, or None) and word bit
settings (either 7 or 8 bit)
• Selection of baud rate settings from 75 to 19,200 BPS
(Data transmission speed is limited to 1,200 BPS
when the signal level is set to 20 mA Current Loop)
l
DIP switch 1 settings that you can change even after
installation